Chip Spreader Model : HIM-CHIP-MECHANICAL-2598
PERFORMANCE
Pneumatic tyre wheel transmits drive from the road surface through a sprocket with the help of dog clutch mounted on shaft. Then drive to roller will be transmitted by shaft through sprocket and chain drive system. All shafts are mounted on self aligning, self lubricating ball bearings with clutch operated by levers either side of the unit. The roller chain drive is fully enclosed in a heavy duty guard designed to self clean. The drive wheel position is adjustable to suit truck/tipper bed heights.
| SPECIFICATIONS OF Chip Spreader Model : HIM-CHIP-MECHANICAL-2598 | |||
|---|---|---|---|
| 01 | Spreading width | : | 2.25 Mtr and 2.5 Mtr |
| 02 | Tipper Suitable for Mount | : | HYVA and Normal Tipper |
| 03 | Body Frame | : | Fabricated from 5 mm reputed steel Plates and Pipes |
| 04 | Baffle | : | To control of Material baffle plate provided with bolting system for material flow form 100 mm to 250 mm in increments of 50 mm |
| 05 | Feed Gate | : | Feed gate is hand operated adjusting screws and rubber gate is p rovided for permit of oversize aggregate without damage. |
| 06 | Tyre Size | : | Pneumatic tyre of 6.00 x 12 size of Reputed Make and fitted with reputed make wheel plate |
| 07 | Tyre Hub | : | Fabricated from steel plates & round bars |
| 08 | Drive System | : | Drive will be given to roller through extra wheel by means of chain sprocket drive system . |
| 09 | Drive Chain | : | Chain will be of DIAMOND / ROLON or Std make |
| 10 | Clutch System | : | Mechanical clutch with Dog Clutch will be provided which can be operated by handle for engage and disengage of drive system |
| 11 | Material Spreading Roller | : | Fabricated out of Standard Steel pipe with adequate thickness and will give drive through chain sprocket system. |
| 12 | Roller Bearings | : | Self lubricating bearings will be fitted to material spreading roller |
| 13 | Sprockets | : | Chain sprockets are fabricated of adequate size according to chain dimensions from MS steel |
| 14 | Bolts & Hardware | : | Bolts, Nuts, Drive keys and other hardware material of reputed make. |
| 15 | Bearings & Pedestals | : | Bearings will be of SKF/FAG or std and Pedestals will be of TR / NTW /NTN or std make will be fitted |
| 16 | Optional.extra | : | Operator platform will with supported railing will be provided on extra cost. This will allow the operator to ride with the machine and operator controls in greater safety. |
| 17 | Width | : | 2.25 Mtr : 7’ 4”, 2.5 Mtr : 8’ 4” |
| 18 | Weight | : | Model : 2.25 Mtr 1100 Kg, Model : 2.5 Mtr 1200 Kg |
| 19 | Shipping Dimesinos | : | Width 2100 mm X Length 4650 mm X Height 1830 mm |
| 20 | Life of Machine (Approx) | : | 10 Years with proper maintenance |
| 21 | List of Consumables | : | 2 years |
| 22 | Accessories | : | 2 years |
| 23 | Recommended Spares to be kept in Stock | : | Springs, Pedestals, Chain, Sprocket, Clutch, Brass Shifter |
